bat-inc_brian

Gauge/Sensor Tee's

Tue, 14 May 2024 19:23:47 GMT

Specialty Tee fitting for installing sensors and switches for gauges or engine management. The TPVW is generally for use with German cars that use M10 x 1.0 factory sensors/switches. The tee allows for use of the standard metric sensor in the run (in-line) position and a 1/8" NPT side port (branch) for the aftermarket sensor. The TP8 is similar but with 1/8 JIS/BSPT thread for Japanese engines, again with factory thread on the run and 1/8 NPT on the branch. The 5602-2 is 1/8 NPT with male/female on the run and female on the branch. This can be used to double-up sensors/switches on most domestic applications.

Rebuilt Factory Hoses

Mon, 19 Feb 2024 19:39:17 GMT

Factory Replacement Hoses: Fuel and oil hoses on many makes and model vehicles are now obsolete. Because of the unique pre-bent, uniquely shaped manifold ends, the hoses are very difficult to remake from standard available parts. The way we generally deal with this is to remove the factory ends and refit modern 30R9 specification fuel hose and re-crimp the factory hose ends. The result is a better than standard replacement. Price varies based on time and materials. The hoses pictured are from a 90's era Mercedes with the last available new cost of 400 for the three shown. These were rebuilt for 250. If you are interested in this service contact us directly for more information.

PTFE Assembly Tool

Wed, 16 Aug 2023 20:02:03 GMT

Hand-held PTFE tool is designed to assist assembling -3, -4, -6, -8 smooth-bore PTFE hose fittings. Tool serves two purposes depending on fitting type. For crimp type hose ends the tool resizes hose PTFE inner which generally becomes out of round after cutting. Once sized, the fitting tail can be easily inserted prior to crimping. For reusable hose ends: place the compression sleeve “olive” on the shaft up to the shoulder with sharp edge forward, insert tool into hose, twist to resize the hose interior while separating the exterior braid from the liner and seating the olive - all in one step. Part# PTT1 $29.95

Red & Blue Clearance

Thu, 04 May 2023 19:16:49 GMT

What was the standard for many years, Red & Blue hose ends have now lost their market popularity. With this in mind, BAT is looking to clearance our remaining R&B inventory at up to 50% off! We have a range of sizes from -4AN to -16AN in angles 00º through 180º in both push-on and reusable swivel hose end types. If you don't have a color preference, you could save considerably on your next plumbing project.

Cooler Blem Sale

Wed, 15 Jun 2022 19:07:21 GMT

Cosmetic Blem Coolers = Cost Savings

Oil Coolers may be cosmetically imperfect for a number of reasons: Paint related (chips or runs), weld splatter around fittings, bent mounting tabs resulting in chipped paint (touched up), bent airway fins (corrected, but unsightly), cores out of tolerance (slightly crooked). Most only suffer one issue. All are brand new, tested and functionally fine. All are between 30.00 to 50.00 off standard pricing.

Current Blem Cooler Inventory (6/22)
(8) A25F22HD - Mocal HD 25 Row 235mm / Series 6 Oil Cooler M22 Female Ports
Regular $ 240.00 / Blem Sale $185.00
(1) A13F22HD - Mocal HD 13 Row 235mm / Series 6 Oil Cooler M22 Female Ports
Regular $ 160 / Blem Sale $130.00
(1) SET613F22 - Setrab 13 Row 235mm / Series 6 Oil Cooler M22 Female Ports
Regular $ 170 / Blem Sale $140.00
(1) SET934F22- Setrab 34 Row 235mm / Series 9 Oil Cooler M22 Female Ports
Regular $ 415 / Blem Sale $365.00

Clearance Oil Coolers

Fri, 14 May 2021 19:03:42 GMT

Recently while moving some crates around the factory we came across a stash of pre-production Mocal HD series oil coolers. These were made about 10 years ago prior to the current black production HD coolers with the slim profile female fluid connections. These have a taller (3/4”) bung for fluid connection and are painted an ugly bright silver or industrial gray. They may also be slightly crooked or blemished, but the pricing more than makes up for their unattractiveness. All units are new and pressure tested. Quantities and pricing are limited to stock on hand.

44 Row 115mm OC1442-105HD $175.00 (regularly $385.00)
(size 13 1/2” high*, 6 1/4” wide, 2” thick) *height less fluid connection
44 Row 235mm OC5442-105HD $220.00 (regularly $440.00)
(size 13 1/2” high*, 11 1/4” wide, 2” thick) *height less fluid connection
50 Row 115mm OC1502-105HD $185.00 (regularly $420.00)
(size 15 1/4” high*, 6 1/4” wide, 2” thick) *height less fluid connection

Billet Sandwich Plates

Tue, 02 Mar 2021 20:47:47 GMT

Introducing Mocal's new billet aluminum sandwich plates that make adding an oil cooler to most engines an easy task. Sandwich plates mount between engine block and oil filter and provide ports for hose connections to and from the remote mounted oil cooler. Our standard cast aluminum sandwich plates have been the benchmark in the industry for over 30 years. As a logical extension, these new billet versions are the ultimate in quality and performance. Plates are available in thermostatic and non-thermostatic versions for 3/4"-16 and M20 oil filter thread sizes. Ports are M22 x 1.5 ORB thread and can support typical -8AN and -10AN connections. Made in England with EU and USA sourced components. Pricing: Thermostatic version SP1BT $179.50, Non-Thermostatic version SP1B $95.50

BMW F650 Flexible Oil Line

Tue, 25 Aug 2020 15:23:40 GMT

This hose is a result of working with BMW bike owners to come up with a solution to a problem: The fixed hard line makes it difficult to service the water pump and other closely placed components on the popular BMW F650 type enduro motorcycles. We make these using high specification –AN type stainless covered hose and alloy fittings. Hoses are covered with black high temperature silicone fire sleeve for additional durability and longevity. PN# BMWF650 $89.50

Lotus Elise/Exige Sandwich Plate

Wed, 05 Aug 2020 19:27:23 GMT

Mocal is the original equipment supplier to Lotus for the Toyota 2ZZ-GE engine mounted thermostatic oil cooler sandwich plate used on the Elise and Exige models. If you are in the market for a replacement we can provide these at a reasonable price. Units are complete including 5/8" BSP union adapters for connection to standard oil cooler hoses or optionally 5/8" BSP x -10 adapters are available if you have re-plumbed using -AN size hose and fittings. Filter center bolt and bleed cock are also included. PART # SP3L $149.00

Billet Sandwich Plates

Tue, 16 Jun 2020 19:32:17 GMT

Our new billet non-thermo sandwich plate is a lightweight, high-flow sandwich plate machined from 6061 aluminum. It’s used to add an external cooler to your vehicles oil system. This oil sandwich plate is available for either M20 or 3/4"-16 oil filters and has two 1/8" NPT plugged ports for sensors, gauges or oil feed lines. Inlet/outlet ports to cooler are ORB M22 x 1.5 thread; we can provide union/adapters to -8AN or -10AN. Specs: weight 9.5oz, square profile o-ring, made in England.

Billet Sandwich Plate for engines using M20 filter SP1BF $85.00
Billet Sandwich Plate for engines using 3/4"-16 filter SP1B $85.00

New Billet Filter Stands

Fri, 21 Feb 2020 18:29:40 GMT

Our latest heavy duty billet aluminum remote filter mounts are available in a few different configurations: left in/out, right in/out and left to right in/out. All are designed with weight savings in mind by keeping size and weight to a minimum. For fluid connection they utilize M22 female ORB ports for high flow and low restriction. Look in the remote filter section for more information and pricing.

MOCAL Oil Cooler for Nissan GT-R (R35)

Mon, 28 Oct 2019 19:03:52 GMT

This is our new, direct fit, high-performance oil cooler for the Nissan GT-R (R35) 2009+ US/JDM, and European models. Cooler features a heavy duty bar/plate core with increased surface area over the somewhat fragile and exceedingly expensive (+$3,000) OEM tube/fin cooler. Our GTR oil cooler is a complete plug-and-play solution which attaches to factory hoses and mounting point; optionally the fluid connections are internally threaded for M22 x –AN unions (-10 or -12); this makes it suitable for use with aftermarket –AN hose/fitting assemblies. With the ever increasing amounts of power customers are getting out of the GT-R type engines, keep in mind oil coolers should always be replaced after engine failures, also if using high volume/pressure oil pumps, our cooler is also capable of operating at +50psi over the standard cooler. Part number OCNIS1 $695.00

Sandwich Plate w/Banjos

Mon, 09 Sep 2019 19:34:18 GMT

Sandwich Plate designed for low clearance installations.

A number of recent installations, especially ones with turbo kits on Subaru BRZ/FRS (FA20 engine) have required alternative sandwich plates using banjo fittings for additional clearance. We have developed this option so the banjos can rotate independently for added versatility. The pictured component is our PN# SP1T-FA20-B10 plate for the Subaru BRZ/FRS ($219.00). Banjos and banjo bolts will suit any of our 1/2" BSP threaded components allowing you to choose where to best use and are available to purchase separately.

New Billet Engine Oil Take-off Plates

Fri, 07 Jun 2019 14:45:31 GMT

We have never understood why typical “billet” engine oil take-off’s always wind up being such bulky, heavy, and expensive affairs. Mocal's new minimalist design billet take-off plates are elegantly compact, lightweight and reasonably priced. Plates utilize a generously sized M22 x 1.5 threaded port which allow for a wide range of unions, hose ends and banjo fittings. Versions available for 3/4"-16 or 20mm oil filter thread. Price $65.00, fittings are sold separately.

13 Row Oil Coolers in Silver

Tue, 23 Apr 2019 14:33:44 GMT

Limited run of silver 13 row oil coolers now available.

As requested by our Cobra kit car building customers, we have just run a limited batch of 13 row -10AN oil coolers in the original silver color. These coolers are still manufactured in England at the facility that supplied Shelby back in the 1960's. PN#A13A10S $153.75

First Blog Post

Mon, 15 Apr 2019 00:00:00 GMT

New BAT Inc / Mocal USA website goes live 4/15/19.

We certainly aren't new to the internet. Our first website went live 21 years ago back in 1998. We think you will find the current version to be straight to the point and easy to navigate. This blog section of the website is new and will be where we offer information updates and introduce new products. BAT